Rod Ends

1.25" Rod End Set 1.5" Tube ID

1.25" Rod End Set 1.5" Tube ID

This is it, a pair of 1 1/4" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 1 1/4" Heims with a 1" through bore to 3/4", 4 zink...
$125.00
Show Room Only
3/4" To 1/2" Rod End Set 1" Tube ID

3/4" To 1/2" Rod End Set 1" Tube ID

KIT INCLUDES: 2--3/4" X 3/4" to 1/2" Bore Heat Treated Chromoly Heims 2--3/4" Tube Adapters (1" Tube ID) 2--3/4" Jam Nuts 4--Misalignment Spacers...
$59.00
Show Room Only
3/4" To 5/8" Rod End Set 1" Tube ID

3/4" To 5/8" Rod End Set 1" Tube ID

KIT INCLUDES: 2--3/4" X 3/4" Bore Heat Treated Chromoly Heims 2--3/4" Tube Adapters (1" Tube ID) 2--3/4" Jam Nuts 4--Misalignment Spacers (For 2" ID...
$59.00
Show Room Only
3/4" To 9/16" Rod End Set 1" Tube ID

3/4" To 9/16" Rod End Set 1" Tube ID

KIT INCLUDES: 2--3/4" X 3/4" Bore Heat Treated Chromoly Heims 2--3/4" Tube Adapters (1" Tube ID) 2--3/4" Jam Nuts 4--Misalignment Spacers (For 2" ID...
$59.00
Show Room Only
7/8" X 7/8" To 3/4" Rod End Set

7/8" X 7/8" To 3/4" Rod End Set

This is it, a pair of 7/8" x 7/8" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 7/8" Heims with a 7/8" through bore to 3/4", 4...
$69.00
Show Room Only
7/8" X 7/8" To 5/8" Rod End Set

7/8" X 7/8" To 5/8" Rod End Set

This is it, a pair of 7/8" x 7/8" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 7/8" Heims with a 7/8" through bore to 5/8" , 4...
$69.00
Show Room Only
7/8" X 7/8" To 9/16" Rod End Set

7/8" X 7/8" To 9/16" Rod End Set

This is it, a pair of 7/8" x 7/8" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 7/8" Heims with a 7/8" through bore to 9/16", 4...
$69.00
Show Room Only
Bushed DOM Sleeve

Bushed DOM Sleeve

Kit Includes: 1-2"x1/4" wall DOM 1-Sleeves for a 1/2" bolt 2-High quality bushings Zerk Fitting Overall Width is 2 3/4" Sold individually
$18.50
Show Room Only
Marjoint

Marjoint

This is our all new Heavy Duty MarJoint with a 9/16" through hole and a 2.63 mounting width. MarJoints are fully rebuildable using a threaded collar...
$35.00
Show Room Only
Marjoint Jam Nut LH

Marjoint Jam Nut LH

These huge 1-1/4" jam nuts are used with our threaded Heavy Duty MarJoint suspension link ends. Black anodized to match our threaded inserts. One jam...
$5.00
Show Room Only
Marjoint Jam Nut RH

Marjoint Jam Nut RH

These huge 1-1/4" jam nuts are used with our threaded Heavy Duty MarJoint suspension link ends. Black anodized to match our threaded inserts. One jam...
$5.00
Show Room Only
Marjoint Service Tool

Marjoint Service Tool

This spanner socket tool is used to service our MarJoints
$15.00
Show Room Only
Marjoint Threaded Insert LH

Marjoint Threaded Insert LH

Use this threaded tube insert to attach our Heavy Duty MarJoint to your suspension link. 1-1/4" SOLD INDIVIDUALLY
$10.00
Show Room Only
Marjoint Threaded Insert RH

Marjoint Threaded Insert RH

Use this threaded tube insert to attach our Heavy Duty MarJoint to your suspension link. 1-1/4" SOLD INDIVIDUALLY
$10.00
Show Room Only
Marjoint, Threaded Shank LH

Marjoint, Threaded Shank LH

This is our all new Heavy Duty MarJoint with a threaded shank. 1-1/4" shank with 9/16" through hole. MarJoints are fully rebuildable using a threaded...
$45.00
Show Room Only
Marjoint, Threaded Shank RH

Marjoint, Threaded Shank RH

This is our all new Heavy Duty MarJoint with a threaded shank. 1-1/4" shank with 9/16" through hole. MarJoints are fully rebuildable using a threaded...
$45.00
Show Room Only
1" Uniball Bearing

1" Uniball Bearing

4130 Chromoly Heat Treated.These can replace most utv control arm uniballs and can be used in many different applications. 1" Uniball Bearing. PTFE...
$34.40
Show Room Only
1" Uniball Bearing Cup

1" Uniball Bearing Cup

1" Uniball Cup. Made from 4130 Chromoly. Internal retaining ring included. Note: Uniball & Misalignment spacers sold separately.
$20.80
Show Room Only
1" Uniball Joint Complete Kit

1" Uniball Joint Complete Kit

You will receive: 1 - 1" 4130 Chromoly Uniball Bearing Cup 2.625" Diameter x 1.5" tall 1 - 1" Heat & Cryo Treated Uniball Bearing 2 - Stainless...
$63.70
Show Room Only
1" Uniball Retention, Snap Ring

1" Uniball Retention, Snap Ring

Internal retaining ring used to keep the replaceable inner Uni-Ball bearing held firmly in place in our 1" Uni-Ball cup. Re-useable, but it is...
$3.00
Show Room Only
1.25" Uniball Bearing

1.25" Uniball Bearing

4130 Heat treated Chromoly. Ruffstuff 1.25" Uniball Bearing. PTFE Lined. Cup and Misalignments sold separately. Sold Individually.
$37.60
Show Room Only
1.25" Uniball Bearing Cup

1.25" Uniball Bearing Cup

1.25" Uniball Cup. Made from 4130 Chromoly. Internal retaining ring included. Note: Uniball & Misalignment spacers sold separately.
$22.00
Show Room Only
1.25" Uniball Retention, Snap Ring

1.25" Uniball Retention, Snap Ring

Internal snap ring is what retains the replaceable bearing inside of our 1.25" Uni-Ball cup. Though re-useable, it is still a good idea to replace...
$3.00
Show Room Only
1.5" Uniball Bearing

1.5" Uniball Bearing

4130 Heat treated Chromoly. 1.5" Uniball Bearing. PTFE Lined. Cup and Misalignments sold separately. Sold Individually.
$44.50
Show Room Only
1.5" Uniball Bearing Cup

1.5" Uniball Bearing Cup

1.50" Uniball Cup. Made from 4130 Chromoly. Internal retaining ring included. Note: Uniball & Misalignment spacers sold separately.
$26.40
Show Room Only
1.5" Uniball Joint - Complete Kit

1.5" Uniball Joint - Complete Kit

You will receive: 1 - 4130 Chromoly Uniball Bearing Cup 3.25" Diameter x 1.75" Tall 1 - 1.50" Heat Treated Uniball Bearing with a 52100 bearing 2 -...
$98.10
Show Room Only
1.50" Uniball Retention, Snap Ring

1.50" Uniball Retention, Snap Ring

Internal snap ring for holding the Uni-Ball Bearing inside of the cup. These can be re-used, but it is a good idea to change them out whenever you...
$3.00
Show Room Only
1" To 3/4" Zinc Misalignment

1" To 3/4" Zinc Misalignment

Misalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint...
$4.25
Show Room Only
1" To 5/8" Zinc Misalignment

1" To 5/8" Zinc Misalignment

Misalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint...
$4.10
Show Room Only
1" To 9/16" Zinc Misalignment

1" To 9/16" Zinc Misalignment

Misalignment does 2 things necessary to run Rod Ends on a 3 or 4 Link Suspension. The first and most important is allow additional room for the joint...
$4.10
Show Room Only
1.25" To 3/4" Stainless Misalignment, Wide, 3" Mounting Distance

1.25" To 3/4" Stainless Misalignment, Wide, 3" Mounting Distance

For use with our 1.25" Uniball Bearing. Sold Individually.
$11.10
Show Room Only
1.5" To 1" Stainless Misalignment, 3" Mounting

1.5" To 1" Stainless Misalignment, 3" Mounting

For use with our 1.5" Uniball Bearings. Sold individually.
$13.60
Show Room Only
Your IP Address is: 3.236.218.88
Copyright © 2021 Locktup Fabrication